Skip to main content

Cisco block telnet and SSH access


Block telnet and SSH access to the Cisco router.

The user must have the privilege to change the settings or basically the admin user account.

Block all (telnet and ssh):

  line vty 0 4
  transport input none

sh startup-config (save config and will persist after reboot or shutdown)

sh running-config (config is save but will not persist after reboot or shutdown)

To enable or unblock:

line vty 0 4
 privilege level 15
 login local
 line vty 0 4
transport input telnet ssh

Before rolling out to production be sure to test it out or else you will leave a vulnerability in your network.

Cheers..till next time!


Comments

  1. Great... Excellent sharing.. This is very helpful for beginners. Read that provide me more enthusiastic. This helps me get a more knowledge about this topic. Thanks for this.hunt aws jobs in hyderabad

    ReplyDelete

Post a Comment

Popular posts from this blog

Copy a single file using robocopy

Copy a single file using robocopy from a local folder to a shared folder on the network.
A simple rule of thumb before any disaster strike, don't interchange the source and the destination.

If source and destination is mistakenly reverse, files might get overwritten. To avoid any loss of data do a test with a dummy file to ensure things work perfectly.
Robocopy [source][destination]   [file to be copied]
robocopy c:\local_c_folder  \\PC_network\shared_folder   file_to_be_copied_xx.txt
The command will be completed successfully provided the network access right has no issues.

Robocopy works quite good on large files. A simple copy or xcopy command will also work but the speed might vary.

Robocopy is free it can be accessed from command line. No need to install the resource kit tool if the operating system is Windows 7 or newer version.

Copy files with selected file extension using PowerShell and Robocopy:

$extension = ('.pdf', '.jpg', '.txt')
gci d:\WorkFolde…

WMIC get computer name

WMIC get computer model, manufacturer, computer name and  username.
WMIC is a command-line tool and that can generate information about computer model, its manufacturer, its username and other informations depending on the parameters provided.
Why would you need a command line tool if there’s a GUI to check?
If you have 20 or 100 computers, or even more. It’s quite a big task just checking the GUI to check the computer model and username.
If you have remote computers, you need to delegate someone in the remote office or location to check.
Or you can just write a batch file or script to automate the task.
Here’s the code below on how get computer model, manufacturer and the username.
Open an elevated command prompt and type:
wmic computersystem get "Model","Manufacturer", "Name", "UserName"
Just copy and paste the code above, the word “computersystem” does not need to be change to a computer name.
A sample output below will be generated if the co…