Skip to main content

Shutdown or reboot computers with user abort option in Windows


Shutdown or reboot Windows client computer and let user decide to cancel or proceed with the system shutdown or reboot operation.

Batch file script that can be deployed via GPO to shutdown or reboot client computers.

Batch file can be set via Task Scheduler and run at a specified time.

The script provides the user to cancel the operation, so if the user is in the midst of doing task that requires the system to be online then the user can choose to abort the operation.

“IF /I” parameter on the script accepts "y" or "Y", it does case insensitivity comparison.

If the input is not y or n, the batch file will keep asking until user presses the desired key.

Here's the script:

@ECHO OFF

:xinvalid

SET /P yes_or_no="Your computer will initiate shutdown in 10 min do you want continue (y/n): "

IF /I %yes_or_no% EQU y (

SHUTDOWN /S /F /T 600

echo "Okay let’s do it, let’s shutdown the system."

TIMEOUT /T 5

exit

)


IF /I %yes_or_no% EQU n (

SHUTDOWN /A

echo "Shutdown cancelled, let's do it some other time."

TIMEOUT /T 5

Exit
 )



IF /I %yes_or_no%  neq y (

echo "Invalid input, press y or n keys only."

goto xinvalid
)



IF /I %yes_or_no%  neq n (

echo "Invalid input, press y or n keys only."

goto xinvalid
)

Comments

Popular posts from this blog

Copy a single file using robocopy

Copy a single file using robocopy from a local folder to a shared folder on the network.
A simple rule of thumb before any disaster strike, don't interchange the source and the destination.

If source and destination is mistakenly reverse, files might get overwritten. To avoid any loss of data do a test with a dummy file to ensure things work perfectly.
Robocopy [source][destination]   [file to be copied]
robocopy c:\local_c_folder  \\PC_network\shared_folder   file_to_be_copied_xx.txt
The command will be completed successfully provided the network access right has no issues.

Robocopy works quite good on large files. A simple copy or xcopy command will also work but the speed might vary.

Robocopy is free it can be accessed from command line. No need to install the resource kit tool if the operating system is Windows 7 or newer version.

Copy files with selected file extension using PowerShell and Robocopy:

$extension = ('.pdf', '.jpg', '.txt')
gci d:\WorkFolde…

WMIC get computer name

WMIC get computer model, manufacturer, computer name and  username.
WMIC is a command-line tool and that can generate information about computer model, its manufacturer, its username and other informations depending on the parameters provided.
Why would you need a command line tool if there’s a GUI to check?
If you have 20 or 100 computers, or even more. It’s quite a big task just checking the GUI to check the computer model and username.
If you have remote computers, you need to delegate someone in the remote office or location to check.
Or you can just write a batch file or script to automate the task.
Here’s the code below on how get computer model, manufacturer and the username.
Open an elevated command prompt and type:
wmic computersystem get "Model","Manufacturer", "Name", "UserName"
Just copy and paste the code above, the word “computersystem” does not need to be change to a computer name.
A sample output below will be generated if the co…