Skip to main content

Ping range of IP Address via command line




How to ping range of IP Address via command line?

Ping a range of IP Address via command line, quite useful in a server core environment or set to task scheduler and run at specific time and day.

Batch files still does it wonder. Below is a command line that can be save as a batch file and set via task scheduler to automatically run at a specified time or day.

Batch file script to ping a range of IP and save to notepad the result.

======================================

FOR /L %I IN (100,1,220) DO  echo %date%  %time% 2 >> d:\pingx.txt  & ping 192.168.1.%I -n 2 >> d:\pingx.txt

======================================

The command will ping  iP range 192.168.1.100 to 192.168.1.220 and send 2 echo request. Results of the ping is save on drive d at a file named pingx.txt.

Copy the command to notepad and save it as a batch file with extension of “.bat” or “.cmd”.

Sample output:

Wed 11/11/2015  17:31:15.05 2  

Pinging 192.168.1.100 with 32 bytes of data:
Reply from 192.168.1.7: Destination host unreachable.
Reply from 192.168.1.7: Destination host unreachable.

Ping statistics for 192.168.1.100:
    Packets: Sent = 2, Received = 2, Lost = 0 (0% loss),
Wed 11/11/2015  17:31:15.05 2  

Pinging 192.168.1.101 with 32 bytes of data:
Reply from 192.168.1.7: Destination host unreachable.
Reply from 192.168.1.7: Destination host unreachable.

Ping statistics for 192.168.1.101:
    Packets: Sent = 2, Received = 2, Lost = 0 (0% loss),
Wed 11/11/2015  17:31:15.05 2  

Pinging 192.168.1.102 with 32 bytes of data:
Reply from 192.168.1.7: Destination host unreachable.
Reply from 192.168.1.7: Destination host unreachable.



Ping whole subnet via command line. Ping the PC or server and shutdown if it is online.
http://quickbytesstuff.blogspot.sg/2015/11/how-to-ping-whole-subnet-using-batch.html


Comments

Popular posts from this blog

Copy a single file using robocopy

Copy a single file using robocopy from a local folder to a shared folder on the network.
A simple rule of thumb before any disaster strike, don't interchange the source and the destination.

If source and destination is mistakenly reverse, files might get overwritten. To avoid any loss of data do a test with a dummy file to ensure things work perfectly.
Robocopy [source][destination]   [file to be copied]
robocopy c:\local_c_folder  \\PC_network\shared_folder   file_to_be_copied_xx.txt
The command will be completed successfully provided the network access right has no issues.

Robocopy works quite good on large files. A simple copy or xcopy command will also work but the speed might vary.

Robocopy is free it can be accessed from command line. No need to install the resource kit tool if the operating system is Windows 7 or newer version.

Copy files with selected file extension using PowerShell and Robocopy:

$extension = ('.pdf', '.jpg', '.txt')
gci d:\WorkFolde…

WMIC get computer name

WMIC get computer model, manufacturer, computer name and  username.
WMIC is a command-line tool and that can generate information about computer model, its manufacturer, its username and other informations depending on the parameters provided.
Why would you need a command line tool if there’s a GUI to check?
If you have 20 or 100 computers, or even more. It’s quite a big task just checking the GUI to check the computer model and username.
If you have remote computers, you need to delegate someone in the remote office or location to check.
Or you can just write a batch file or script to automate the task.
Here’s the code below on how get computer model, manufacturer and the username.
Open an elevated command prompt and type:
wmic computersystem get "Model","Manufacturer", "Name", "UserName"
Just copy and paste the code above, the word “computersystem” does not need to be change to a computer name.
A sample output below will be generated if the co…