Skip to main content

How to mount NFS shares in Linux




To mount NFS shares in Linux such as NAS NFS shares, Linux NFS shares or other devices which supports NFS sharing.

This example command below I used to mount an NFS share from a NAS device.

Of course you need to check whether your NAS device supports NFS, you can check this from the admin panel of the NAS device.

Consult the manual of your device or visit manufacturer's website.

1. First is to configure NAS which folder to be shared using NFS
2. Set options whether the NFS share would be a read only share or read and write.
3. Once everything is setup on the NAS.

   - On the Linux box type this command below:

showmount -e 192.168.1.7

change the IP Address to the IP Address of NAS device or the IP Address which has NFS shares.

From my environment it has this output:
Export list for 192.168.1.7:
/c/backup   *
/c/Videos (everyone)

The output of showmount -e IP.Address basically shows NFS shares.

If the output of showmount doesn't show anything, of course it means that there's nothing to mount or no NFS shares available.

Anyway, to mount an available NFS share. Type this command:

mount  -t  nfs   192.168.1.7:/c/Videos  /mnt/Videos

/mnt/Videos - the Videos folder should be existing on the /mnt folder.

If no such folder is present an error will occur.

To create a folder in Linux just type: mkdir /mnt/Videos

If no error occurs after typing this command:
mount  -t  nfs   192.168.1.7:/c/Videos  /mnt/Videos

Browse to the mounted folder to check whether you are able to read and write.

Type: cd /mnt/Videos
or just type: ls -l /mnt/Videos and if there are contents available on the NFS shares it will be shown.

That's it a simple way to mount nfs shares.

Here's the command again:

mount  -t  nfs   192.168.1.7:/c/Videos  /mnt/Videos

mount -t  nfs  IP.Address.of.the.device:/shared/folder/name  /linuxfolderlocation/createdfolder

IP.Address.of.the.device:/shared/folder/name - is the IP Address of the device in which the share is located
 
/linuxfolderlocation/createdfolder - is the local folder on the Linux Box where the shared folder will be mounted
 - this shared folder should be created or existing on the Linux box before mounting the shared folder


Cheers..Hope it helps..

Comments

Popular posts from this blog

Copy a single file using robocopy

Copy a single file using robocopy from a local folder to a shared folder on the network.
A simple rule of thumb before any disaster strike, don't interchange the source and the destination.

If source and destination is mistakenly reverse, files might get overwritten. To avoid any loss of data do a test with a dummy file to ensure things work perfectly.
Robocopy [source][destination]   [file to be copied]
robocopy c:\local_c_folder  \\PC_network\shared_folder   file_to_be_copied_xx.txt
The command will be completed successfully provided the network access right has no issues.

Robocopy works quite good on large files. A simple copy or xcopy command will also work but the speed might vary.

Robocopy is free it can be accessed from command line. No need to install the resource kit tool if the operating system is Windows 7 or newer version.

Copy files with selected file extension using PowerShell and Robocopy:

$extension = ('.pdf', '.jpg', '.txt')
gci d:\WorkFolde…

WMIC get computer name

WMIC get computer model, manufacturer, computer name and  username.
WMIC is a command-line tool and that can generate information about computer model, its manufacturer, its username and other informations depending on the parameters provided.
Why would you need a command line tool if there’s a GUI to check?
If you have 20 or 100 computers, or even more. It’s quite a big task just checking the GUI to check the computer model and username.
If you have remote computers, you need to delegate someone in the remote office or location to check.
Or you can just write a batch file or script to automate the task.
Here’s the code below on how get computer model, manufacturer and the username.
Open an elevated command prompt and type:
wmic computersystem get "Model","Manufacturer", "Name", "UserName"
Just copy and paste the code above, the word “computersystem” does not need to be change to a computer name.
A sample output below will be generated if the co…