Skip to main content

Change drive letter using command line




If you are scared using command line changing drive letter can be done via GUI using the disk management tools interface.

If you are command line junkie, in Windows 7 or Windows 8 to change drive letter using command line is quite straight forward as well.

And one advantage of using command line if you need to change one or more computers, you don't need to disturb the user or visit the workstation.

Scripting using command line will automate the process.

To change using command line, open an elevated command prompt and type: diskpart

On diskpart window, type:

list volume and press enter

List volume will show all the volume available on the computer.

Select the volume you wish to change the drive letter.

Select volume 0 and press enter

Above command will select volume 0.

To changed drive letter of volume 0. Type this command:

Assign Letter=B and press enter

Assign letter=b, is quite straight forward command. It will assign the specified letter to the currently selected volume.

Type: exit and press enter.

Diskpart will be exited and open explorer; you will notice that volume 0 letter has been changed to drive B.

See image below, on my system which I run this command.


Volume 0 refers to the DVD drive; it could be different on your system.

That's it three command lines is needed on diskpart to change the drive letter.

1. List volume -- to list all volumes on the computer
2. Select volume #number -- select the desired volume number from the output of list volume
3. Assign Letter=Drive_Letter -- assign a value or drive letter for the selected volume

Cheers..Hope it helps..
 


Comments

Popular posts from this blog

Copy a single file using robocopy

Copy a single file using robocopy from a local folder to a shared folder on the network.
A simple rule of thumb before any disaster strike, don't interchange the source and the destination.

If source and destination is mistakenly reverse, files might get overwritten. To avoid any loss of data do a test with a dummy file to ensure things work perfectly.
Robocopy [source][destination]   [file to be copied]
robocopy c:\local_c_folder  \\PC_network\shared_folder   file_to_be_copied_xx.txt
The command will be completed successfully provided the network access right has no issues.

Robocopy works quite good on large files. A simple copy or xcopy command will also work but the speed might vary.

Robocopy is free it can be accessed from command line. No need to install the resource kit tool if the operating system is Windows 7 or newer version.

Copy files with selected file extension using PowerShell and Robocopy:

$extension = ('.pdf', '.jpg', '.txt')
gci d:\WorkFolde…

WMIC get computer name

WMIC get computer model, manufacturer, computer name and  username.
WMIC is a command-line tool and that can generate information about computer model, its manufacturer, its username and other informations depending on the parameters provided.
Why would you need a command line tool if there’s a GUI to check?
If you have 20 or 100 computers, or even more. It’s quite a big task just checking the GUI to check the computer model and username.
If you have remote computers, you need to delegate someone in the remote office or location to check.
Or you can just write a batch file or script to automate the task.
Here’s the code below on how get computer model, manufacturer and the username.
Open an elevated command prompt and type:
wmic computersystem get "Model","Manufacturer", "Name", "UserName"
Just copy and paste the code above, the word “computersystem” does not need to be change to a computer name.
A sample output below will be generated if the co…