Skip to main content

Check Task Scheduler using command line




Using command line to check Task Scheduler could be daunting sometimes if you are a GUI junkie.

But if you need to monitor remote system definitely command line would be the best choice.

And using command line process can be automated without user intervention.

Here are some examples on how to use command line to check Task Scheduler.
 
schtasks /query /fo LIST /v > sch_all_task.txt

Command line above will query task scheduler and redirect the output to sch_all_task.txt

Redirecting to a text file is useful.

You will have a copy of the result in a text file for record purposes.

If the output is not redirected to a text file some of the result cannot be seen on the command line window.

The above command will list all the scheduled tasks results running on task scheduler.


To check a single scheduled Task in command line use this command below:

C:\>schtasks /query /v /fo list  /TN "Monitor Files"

Sample Output:

Folder: \
HostName:                                                     Computer-01X
TaskName:                                                     \Monitor Files
Next Run Time:                                              3/29/2014 12:01:48 PM
Status:                                                             Ready
Logon Mode:                                                  Interactive only
Last Run Time:                                               3/28/2014 12:01:48 PM
Last Result:                                                     0
Author:                                                           Administratorx
Task To Run:                                                  batch_File_Monitor.bat
Start In:                                                           C:\Monitor_File\
Comment:                                                       N/A
Scheduled Task State:                                     Enabled
Idle Time:                                                        Disabled
Power Management:                                       Stop On Battery Mode, No Start On Batteries
Run As User:                                                   Administratorx
Delete Task If Not Rescheduled:                    Enabled
Stop Task If Runs X Hours and X Mins:        72:00:00
Schedule:                                                         Scheduling data is not available in this format.
Schedule Type:                                               Weekly
Start Time:                                                      3:01:48 PM
Start Date:                                                       3/16/2014
End Date:                                                        N/A
Days:                                                               MON, TUE, WED, THU, FRI
Months:                                                           Every 1 week(s)
Repeat: Every:                                                Disabled
Repeat: Until: Time:                                       Disabled
Repeat: Until: Duration:                                 Disabled
Repeat: Stop If Still Running:                        Disabled

Output above is quite long.

If you just want to check whether the task has run successfully or some error occurred use command line below:

If the task name comes with spaces on its Task Name enclosed it in quotes.

Command below will just check the last result of the Task Name specified.

If the result is zero, task has successfully run without any errors.

C:\>schtasks /query /v /fo list  /TN "Monitor Files"  | findstr "Last Result"

Sample output:
Last Run Time:                        3/28/2014 12:01:48 PM
Last Result:                          0


To check remote computers for Task Scheduler results use command below:

C:\>schtasks /query /FO LIST /V /S Computer-01X 
/U Domain1x\administratorx /P domenPassWordx /TN "Monitor Files"

To connect to remote system the username specified should have the proper admin rights to login remotely to the system.

Command lines that is quite useful in monitoring remote computers for Task Scheduler results or settings.


Type schtasks/? to check examples on command line.



Cheers!!! Hope it helps..

=========================
Educational App for Android Kids:

https://play.google.com/store/apps/details?id=com.letsmultiply

Comments

Popular posts from this blog

Copy a single file using robocopy

Copy a single file using robocopy from a local folder to a shared folder on the network.
A simple rule of thumb before any disaster strike, don't interchange the source and the destination.

If source and destination is mistakenly reverse, files might get overwritten. To avoid any loss of data do a test with a dummy file to ensure things work perfectly.
Robocopy [source][destination]   [file to be copied]
robocopy c:\local_c_folder  \\PC_network\shared_folder   file_to_be_copied_xx.txt
The command will be completed successfully provided the network access right has no issues.

Robocopy works quite good on large files. A simple copy or xcopy command will also work but the speed might vary.

Robocopy is free it can be accessed from command line. No need to install the resource kit tool if the operating system is Windows 7 or newer version.

Copy files with selected file extension using PowerShell and Robocopy:

$extension = ('.pdf', '.jpg', '.txt')
gci d:\WorkFolde…

WMIC get computer name

WMIC get computer model, manufacturer, computer name and  username.
WMIC is a command-line tool and that can generate information about computer model, its manufacturer, its username and other informations depending on the parameters provided.
Why would you need a command line tool if there’s a GUI to check?
If you have 20 or 100 computers, or even more. It’s quite a big task just checking the GUI to check the computer model and username.
If you have remote computers, you need to delegate someone in the remote office or location to check.
Or you can just write a batch file or script to automate the task.
Here’s the code below on how get computer model, manufacturer and the username.
Open an elevated command prompt and type:
wmic computersystem get "Model","Manufacturer", "Name", "UserName"
Just copy and paste the code above, the word “computersystem” does not need to be change to a computer name.
A sample output below will be generated if the co…