Skip to main content

Unable to connect wireless network



 A computer with Windows 8 or Windows 8.1 or even windows 7, is not able to connect to a particular wireless network but is working fine on other wireless network
 
Then it could be the wireless security type mismatch on the computer and the wireless router.

To solved the issue.

Go to "Control Panel"

Select “Set up a new connection or Network”

Then click on "Manually connect to a Wireless Network"

See pic below:



On the new window, key in the details of the wireless network.

If not sure of the details for the wireless network, get the info from the wireless administrator. 

Key in: 
        Network name - network name is the Wireless SSID or the Wireless network name
        Security Type - select WPA2-Enterprise, WPA2-Personal or check with the wireless administrator about the security type setup on the wireless router
        Encryption Type - select AES or TKIP
        Security Key - this will be the wireless password


See pic below:


Tick the check box "Start this connection automatically", so every time the wireless is detected the computer will auto connect to the wireless network.

Once everything is setup, click on "Next" and click on "Close".

If everything works fine, the computer will be connected to the wireless network.



Comments

Popular posts from this blog

Copy a single file using robocopy

Copy a single file using robocopy from a local folder to a shared folder on the network.
A simple rule of thumb before any disaster strike, don't interchange the source and the destination.

If source and destination is mistakenly reverse, files might get overwritten. To avoid any loss of data do a test with a dummy file to ensure things work perfectly.
Robocopy [source][destination]   [file to be copied]
robocopy c:\local_c_folder  \\PC_network\shared_folder   file_to_be_copied_xx.txt
The command will be completed successfully provided the network access right has no issues.

Robocopy works quite good on large files. A simple copy or xcopy command will also work but the speed might vary.

Robocopy is free it can be accessed from command line. No need to install the resource kit tool if the operating system is Windows 7 or newer version.

Copy files with selected file extension using PowerShell and Robocopy:

$extension = ('.pdf', '.jpg', '.txt')
gci d:\WorkFolde…

WMIC get computer name

WMIC get computer model, manufacturer, computer name and  username.
WMIC is a command-line tool and that can generate information about computer model, its manufacturer, its username and other informations depending on the parameters provided.
Why would you need a command line tool if there’s a GUI to check?
If you have 20 or 100 computers, or even more. It’s quite a big task just checking the GUI to check the computer model and username.
If you have remote computers, you need to delegate someone in the remote office or location to check.
Or you can just write a batch file or script to automate the task.
Here’s the code below on how get computer model, manufacturer and the username.
Open an elevated command prompt and type:
wmic computersystem get "Model","Manufacturer", "Name", "UserName"
Just copy and paste the code above, the word “computersystem” does not need to be change to a computer name.
A sample output below will be generated if the co…