Skip to main content

Batch file script lock down a computer



Ever in need to lock your computer via batch file script?

On Windows 7 and Windows 8 this can be done within just a few lines of batch file script.

The script can be set using the task scheduler and run the batch file script at specified time.

The script will give an option to the user to abort or to continue locking down the pc or workstation.

Choice to abort or continue is within 5 seconds. Of course the time can be changed to any desired time.

After 5 seconds, user will need to press Ctrl + C to abort the script and is given 10 seconds.

The script will continue to lock the computer if not aborted.

This could be useful on a scenario where the user always leave the desk, or for unmanaged computer that needs to be lock at a specified time.


Here's the piece of code snippet using batch file script to lock the computer:

================================= 

@echo off
echo "This computer will be lock within 15 seconds, Enter your choice within 5 seconds. Press "a" to abort "c" to continue.."
choice /c ac /n /t 5 /d a
if %errorlevel%==1 goto :exit
if %errorlevel%==2 goto :CONTINUE

:exit

timeout /t 10 /nobreak

:Continue
rundll32.exe user32.dll, LockWorkStation

=================================


Cheers! Hope it helps someone.. 


Comments

Popular posts from this blog

Copy a single file using robocopy

Copy a single file using robocopy from a local folder to a shared folder on the network.
A simple rule of thumb before any disaster strike, don't interchange the source and the destination.

If source and destination is mistakenly reverse, files might get overwritten. To avoid any loss of data do a test with a dummy file to ensure things work perfectly.
Robocopy [source][destination]   [file to be copied]
robocopy c:\local_c_folder  \\PC_network\shared_folder   file_to_be_copied_xx.txt
The command will be completed successfully provided the network access right has no issues.

Robocopy works quite good on large files. A simple copy or xcopy command will also work but the speed might vary.

Robocopy is free it can be accessed from command line. No need to install the resource kit tool if the operating system is Windows 7 or newer version.

Copy files with selected file extension using PowerShell and Robocopy:

$extension = ('.pdf', '.jpg', '.txt')
gci d:\WorkFolde…

WMIC get computer name

WMIC get computer model, manufacturer, computer name and  username.
WMIC is a command-line tool and that can generate information about computer model, its manufacturer, its username and other informations depending on the parameters provided.
Why would you need a command line tool if there’s a GUI to check?
If you have 20 or 100 computers, or even more. It’s quite a big task just checking the GUI to check the computer model and username.
If you have remote computers, you need to delegate someone in the remote office or location to check.
Or you can just write a batch file or script to automate the task.
Here’s the code below on how get computer model, manufacturer and the username.
Open an elevated command prompt and type:
wmic computersystem get "Model","Manufacturer", "Name", "UserName"
Just copy and paste the code above, the word “computersystem” does not need to be change to a computer name.
A sample output below will be generated if the co…